#propertycontractors247 - Property Contractor 247

We often take the energy we use in our homes for granted without realising there are plenty of ways to reduce our costs.

If you really want to keep those utility bills down this winter, there are some simple and inexpensive ways to improve your energy efficiency. Cutting the amount of power we use isn’t just good for our bank balances, however, it’s great for the environment as well.

Switch Off and Save

How often do we leave appliances plugged in when we go off to bed? Turning things off can save you a fair amount of money both in the short and long term. That means not leaving a light on in a room when it’s not being used, turning off radiators in bedrooms where no one is staying and not leaving devices on standby overnight.

Turn the Thermostat Down 1 Degree

Most people involved in energy efficiency have one consistent mantra and it’s this: Turning the thermostat down, even by just a degree or two, can save energy and therefore money.

Seal Draughty Areas

Draughts can cause a good deal of heat loss and give the perception of cold, especially in older homes. If you want to improve this, the easiest way is to walk around the house and check areas like windows and doors.

Change to LED Bulbs

We should all be starting to change to LED bulbs by now. Not only are they super-efficient but the cost of the bulbs has come down over the last few years.

Install a Smart Meter

Smart meters not only allow you to control your energy use it gives you a clearer idea where you can make changes and lower your bills. Tracking energy usage is really beneficial, particularly over the wintertime. Look at different times to put your heating on or perhaps turning off radiators in rooms that are not in use. The savings will soon mount up.

Boost Your Insulation

Finally, one area we can overlook is the insulation in the loft. This can often degrade over time or get flattened when someone heads up to get something or do some work.

There are several recognised advantages of switching to LED lighting. Studies show that LED bulbs are 90% cheaper in running costs than your existing spotlights, and with that being said, an average house with 40 spotlights converted to LED lighting will save you a possible £500 per annum in running costs.

Converting from spotlights to LED lighting also has the advantages of:

Efficient

LED lighting bulbs tend to last for years and years so there’s no need to worry about changing the bulbs.

Safe and Secure

With other lighting transformers can sometimes break and the bulb itself can overheat, this isn’t the case with LED lighting. They also provide a reduced level of CO2 emissions in comparison to other bulbs.

Great Garden Lighting

Led lights can also be installed in the garden making a very attractive feature.

Energy Savings

Led lights can also replace your existing fluorescent lights in shops and offices with led panels and are far more attractive and energy efficient with up to 70% energy savings being reported.

How can I convert my spotlights to LED?

Should you be interested in converting your spotlights to LED lights, look no further, the professional and fully qualified electricians at Property Contractors 247 have you covered. When it comes to LED lights, we’re experts and will ensure you receive a top quality LED light installation service at your property.

What to expect from Property Contractors 247?

Our team of professional and qualified electricians specialise in providing a friendly response as well as fast and efficient service. With over 12 years’ experience, we have the knowledge and a highly skilled team who will make sure you receive a quality service for your LED lighting in Camden Town, Kentish Town, Highgate Road around North London area.

All of our contractors are NICEIC approved and our electricians are City and qualified, we make sure that we keep up to date with industry standards as well as update all of our certifications. You can rest assured that you’re in the right hands with Property Contractors 247.

Professional plumbers drive around with plenty of specialty equipment on their trucks, homeowners can handle more of their own needs with just a handful of plumbing tools.

1. Sink Auger

A sink auger also called a drum auger or canister auger is the ultimate weapon for breaking up and clearing clogs in sink and tub drains.

A sink auger consists of a flexible stainless steel cable with a corkscrew tip at the end.

The cable is coiled within a drum canister and is extended into a drain to reach a clog and clear it.

2. Toilet or Closet Auger

The toilet auger also called a closet auger or water closet auger is used to clear clogs in toilets.

A toilet auger has a long metal rod with a bend for reaching into the hole at the bottom of the toilet bowl.

A rubber sleeve covers the bend to protect the porcelain in the toilet from being scratched.

3. Flange Plunger

The flange plunger, or ball or toilet plunger, is a specially shaped plunger used to clear clogs in toilets.

It works like a regular plunger but has a flange with an extended rubber flap below the dome of the plunger head that helps seal around the hole at the bottom of the toilet bowl.

4. Cup Plunger

The cup plunger may be the most common plumbing tool in the home.

Do not use this plunger for clearing toilet clogs; that requires a specially shaped plunger called a flange plunger previous slide. Some flange plungers, though, can be used as standard cup plungers when the flange is tucked up inside.

5. Plumber's Tape

Plumber's tape is an essential material for preventing leaks at threaded plumbing connections.

Plumber's tape is a thin white tape that you wrap around threads on pipes and fittings before twisting the parts together.

6. Channel-Type Pliers

Channel-type pliers are commonly known by the brand name Channel-Locks, and are also known as slip-joint pliers.

They're similar to regular adjustable pliers but have extended adjustment sections as well as angled jaws, allowing you to grip pipes or other plumbing parts of almost any size.

7. Adjustable Pipe Wrench

An adjustable pipe wrench is the quintessential metal plumbing tool. It provides tremendous leverage and grip.

A pipe wrench leaves teeth marks behind and is not recommended for removal of shiny fixtures or for small or fragile pipes, like copper water pipes.

8. Faucet Valve-Seat Wrench

A faucet valve-seat wrench is a simple tool used to remove the valve seats on a compression faucet.

When the washer wears out, the valve seat can become damaged and rough, preventing a complete seal. When that happens, you can remove the valve seat and replace it, using a valve seat wrench. If the seat is not removable, you must regrind it to a smooth surface using a reseating tool.

9. Faucet Packing, Washers and O-rings

Faucet packing and rubber washers and O-rings are lifesavers for fixing leaky valves on sinks, radiators, and other old or traditional equipment.

Rubber washers and O-rings are sold in variety packs containing several different shapes and sizes. If you're fixing an old faucet and can't find an official replacement part at the store, a variety pack well have the part you need.

10. Tubing Cutter

The tubing cutter is an essential plumbing tool if you're working with copper pipe.

Copper requires clean, square cuts, and tubing cutters do just that with much less effort than a hacksaw. It has a thin cutting wheel that cuts the metal and a flat pressure wheel that applies pressure when you turn the tool's knob.

Property Contractors 247 Tips and tricks for making your best home.

When you are busy cooking your favorite meal, you probably don’t think about how much electricity you are using but maybe you should. Investing in an energy-efficient stove has many advantages, including significant savings on utility costs.

If you are cooking with an electric stove, you may be losing out on some major energy savings.

If you’re having cooktop issues, while you save up, you could consider a cost comparison of having your current appliance fixed, versus just buying whatever you can afford.

Here's some info to help you what you might want to save up for:

Electric Stove Power Consumption

Electric stoves draw between 2,000 and 5,000 watts of electricity. The actual amount of electricity use depends on the number of burners you use, whether you use the oven, and how long it takes to finish cooking the meal.

To promote greater energy efficiency, try matching the burner size to the size of the pot or pan you are using. When you use the large burner to heat a small pot or pan, you are wasting much of the heat and energy generated by the burner.

Do Gas Stoves Use Electricity?

Gas stoves have two ignition systems: one that uses a pilot light that always stays lit, and one that uses an electric spark system to ignite the burner. Although an electric igniter uses electricity, it is actually more energy-efficient than a pilot light. And compared to an electric stove, a gas stove’s electric igniter uses a minuscule amount of power.

If you like to cook and entertain, then your kitchen is probably the hub of activity in your home. You deserve an energy-efficient stove that cooks evenly and looks great.

Get on board, whether you are refreshing the interior design to make it more beautiful or simply more functional.

There is a list of cool ways of painting and decorating that can help create a charming and neat design.

Living Space Interior

High-end house renovation and remodeling project

The organization of space is both the most complex and the most interesting stage. An inventor and a designer must awake within you. Besides, the smaller the size of the apartment, the more actively the inventor’s idea must work.

While designing the living space, be armed with a pencil and paper and make up a detailed plan.

Make notes of the exact sizes of rooms, doors, window apertures, the height of walls, etc. Otherwise, it would be impossible to order new furniture.

Make functional, practical and beautiful interior design when decorating your home

Home Decorating Colours

Use skilfully the colour scheme for painting and decorating to achieve good psychological effects.
As to the colours scheme, pay attention to the placement and orientation of your windows. With solar exposure in mind make the final decision.

If the room has the North-facing windows, it is recommended to use a warm tones colour scheme. If the South-facing, then use the cold ones.

Style, Texture & Light

Generally, in the design of interiors, elements of rather large numbers of “historical” styles are used. It can be baroque, rococo, classic, pseudo-Gothic, Victorian style. Besides, it can be modernist style, art deco, constructivism, minimalism, hi-tech and, finally, eclecticism.

Victorian Design Elements

The English feeling of measure has allowed the consolidation of all this variety which is shown in the subtleties of semi-tones and colour scores. In such a house a spacious hall looks like a “high-grade” room with a monumental carved table.

In addition, there is a mirror in a carved frame, a large chest of drawers – pier-glass table. Furthermore, there is a striking long-case clock, a sprawling hat tree with iron hooks, “a cell” for umbrellas and newspapers.

Minimal Art

The modern interior in the style of minimalism can be characterized by the use of only necessary objects. The most important thing to remember while creating such interiors is a competently planned space. Certainly, it contains a lot of diffused, quiet light and air.

Combination of Different Styles

Try our design tips for your home decorating and remodelling projects. let our team of Property Contractors 247 do the job.
We provide all types of home decorating and refurbishment works.