Plumbers have their own secrets of the trade, so consider some things you should know about your plumbing that they might not tell you.
Protecting your pipes is the key to preventing costly water leaks. A water leak not only causes property damage, but it can also drive up your water bill.
Wrap Them With Insulation
You can buy foam tubes that are easy to install and that will keep pipes warm during the winter.
Take Care of Your Sump Pump
Without the sump pump, the interior of the house can flood and that will lead to mold growth.
Educate Your Family About the Toilet
The best way to avoid a clog is to make sure everyone knows what can and what can’t go down the toilet bowl.
Caring for the Water Heater
If your water heater is over 8 to 12 years old, it’s time for a new one. If the one you have isn’t operating efficiently, it costs you money.
A little maintenance goes a long way with water heaters, too. Start by draining it at least once a year to remove sediment from the bottom.
When You Do Need to Hire a Plumber
There are some projects that simply require a licensed professional. When you need a plumber, look for someone that has been in business for at least five years. Check our sites Property Contractors 247
Toilet repair isn’t a job for the faint hearted though; whether it’s an issue with the flush or a problem with a leaking tank, lots of things can go wrong and it’s important to be able to pinpoint the problem if you need to call a plumber.
Here are just some of the plumbing issues you might experience with a toilet.
Toilet repair for leaking or running water
There should not be a constant sound of running water coming from your toilet, or water running down the toilet bowl a long time after flushing.
If there is, a toilet plumbing expert will tell you that you have a problem with leakage.
Toilet plumbing and blockages
One of the most undesirable toilet repair issues, a blocked toilet can cause an overflow and in the worst case scenario, it could flood your bathroom with unclean water from the toilet.
The causes of such blockages can be either due to the materials being flushed down the toilet, or because of an inadequate flushing mechanism.
Toilet repair techniques for poor flushing
If your toilet isn’t flushing correctly, there’s a chance it can be rectified simply by lifting the lid in the cistern and examining the tank for common toilet plumbing problems.
These are some simple ways to diagnose minor toilet plumbing issues, but if any significant repairs or replacements need to be carried out, it’s always best to consult a professional.
At Property Contractors 247, we have a fully qualified team of toilet repair technicians who can spot and treat all types of toilet-related problems for you.
Protect your Home From Electrical Fires
It’s the time of year when the majority of electrical fires occur due to an increased number of heating appliances in homes and plug sockets being overloaded to accommodate Christmas lights.
Electrical fires happen because of problems in house wiring or appliance failures, but many occur due to mistakes that homeowners make like overloading electrical sockets or extension leads.
Here are the five most common causes of electrical fires in homes:
1.Faulty Sockets / Appliances
Most electrical fires are caused by faulty electrical plug sockets and dated appliances that have been around for a while.
Don’t use an appliance with a worn cord which could send heat onto combustible surfaces like floors, curtains, and rugs that can start a fire.
2.Light Fixtures & Fittings
Lamps, light bulbs, and light fixtures and fittings are another common reason for electrical fires.
Installing a bulb with a wattage too high for the lamps and light fixtures is a leading cause of electrical fires.
Check the maximum recommended bulb wattage on any lighting fixture or lamp and never exceed this amount.
Appliances should be plugged directly into outlets and not plugged into an extension lead for any length of time.
Only use extension cords as a temporary measure. If you do not have the appropriate type of plug sockets for your appliances, get an electrician into your home to install new ones – a much safer alternative.
Many times people put these types of heaters too close to combustible surfaces such as curtains, beds, clothing, chairs, sofas and rugs.
Coil space heaters are especially dangerous due to the coils becoming so hot that they will almost instantly ignite any nearby flammable surface.
If you do use portable heaters, use the radiator-type that diffuse heat over the entire surface of the appliance.
5.Outdated Wiring Systems
If a home is over 20 years old, it may not have the wiring capacity to handle the increased amounts of electrical appliances in today’s average UK home, such as computers, televisions, games consoles, kitchen gadgets etc.
Breakers should be triggered when circuits get overloaded by too much electricity, but outdated breaker boxes often have worn connectors that do not work, causing the system to overload and start an electrical fire.
If you can run through this list and be happy that everyone has been considered or actioned, then you’ve given your home the best chance against fire.
Accidents happen but usually an accident is penned down to wiring neglect or appliance failure that’s too near combustible material.
Your local fire and rescue service will be able to help and potentially conduct a home fire risk assessment. For more information, visit property contractors 247
Most of us know that it is very important to get the electrical safety certifications. But most people think that it is only required while renting or selling out the property.
Actually, here in this article we are discussing in detail about this so that people would know when they are liable to get the electrical test certificate.
Get a Certificate Before Buying a House:
People who are actually thinking of buying a new or old house should prefer to opt for the safety inspection. So that you might know whether its electricity wiring is safe or not.
Get certificate if you Own old house:
People who actually own a house that is old and have the old electrical wiring should prefer to opt for getting an electrical test certificate.
This will help them to actually prevent any of the electrical fire accidents in their home. Other than that it will also help you to get rid of all types of electrical problems that you are facing.
Other than that there are some more reasons to have an electrical inspection on our property that include:
Get the Certificate After a Major Storm:
If your areas of society where you live have faced any type of major storm or flooding, then you must opt to get the commercial electrical test certificate.
Get the Certificate After Regular Interval of Time:
The next thing that you should do while dealing with electricity in your home is to fix the schedule after a regular interval of time to get the electrical test certificate.
Commercial and residential, both kinds of buildings can become prong to danger and threat. These perils can be in the form of damage electrical appliances, gas leakages, noisy location, uncheck of health-related factors and much more.
Below is a detailed checklist that is shared to follow for inspecting a building safety.
Physical Hazards and Safety:
Commercial and residential buildings can face physical hazards that can occur in the form of noisy and crowded areas and insufficient energy supply.
It can happen if unresistant weather material is used in the construction of the building.
Biological Hazards And Safety:
Presence of some organisms within and alongside a commercial and residential building can generate biological hazards.
These perils can occur because of an unhygienic environment, presence of a dump outside the building, and stagnation of water in streets.
Chemical Hazards And Safety:
Commercial, as well as residential buildings, can face chemical threats because of the supply of gas pipelines and the presence of other lubricant and combustible materials.
Ergonomic Hazards And Safety:
This kind of hazard is attached to the working conditions of employees in a commercial building.
The repetition of hard work, inadequate working postures, are some of the examples which can cause ergonomic hazards.
There occur various uncheck threats in commercial and residential buildings.
In residential areas, the presence of broken wires, exposure of electrical cables to heatwaves, unresistant material in the construction of houses are few unchecked safety measures.
It is mandatory to overcome these loopholes to prevent damage or loss.
Psychological Hazards And Safety:
Commercial and residential building location and working environment can generate psychological problems among visitors, customers, and residents.
For example; if your office location is near the manufacturing industry, then the noise of machinery can increase the frustration level among employees and will also affect their productivity.
Contact Property Contractors 247 and we can help you!
In this blog post our expert plumber walks you through removing and old close couple system toilet, preparing the space and installing a new toilet system.
Remove the lid on the cistern
The first step is pretty easy. Simply remove the lid to the cistern and have a good look inside to familiarise yourself with all the parts. Your new cistern will probably come with the internal parts assembled but it's always better to have a working knowledge of how they operate to make your toilet work.
Turn off the water supply
Once you’ve turned off the water supply it's a good idea to flush the toilet to check. If the water supply is turned off properly the cistern shouldn't fill up again when you flush.
Disconnect the water supply to the toilet itself.
With a pair of adjustable spanners slacken off the nut. Unscrew it fully and remove the pipe from the cistern block. Use a small towel to catch any excess water that might drop from the pipe.
Remove the cistern from the wall
Most toilets have a couple of screws to secure the toilet cistern to the wall. simply unscrew them to remove the unit.
Remove the toilet waste pipe (soil pipe) from the toilet.
On a lot of toilets the pipe going out the back of the toilet is possible on a flexible quick.
Remove the toilet
Most toilets are secured into place by a couple of screws and a bit of silicone. So we need to remove the screws and cut the silicone and you should be able to move the toilet out of the way.
Prepare the area for the new toilet
Now your old toilet is removed it’s time to give the floor a good clean and remove any debris that's in the way.
If you need any help to remove and install your toilet you can Contact us anytime!
Installing your new toilet
Now it’s time to install your new toilet. The procedure is almost the reverse steps of the removal but with a few extra things to bear in mind.
Fix the toilet to the floor
The first thing you’ll want to do, before actually securing the toilet in place, is to get the new toilet bowl into the position you want it to be in.
Fit the soil pipe
Before you fix the soil pipe on the back of the toilet it's a good idea to get a silicone gun and run round the inside of the pipe.
Put the cistern back on
Make sure that any seals that she supplied with your new toilet are in place to avoid unwanted leaks.
Sort out the water supply
This could potentially be the trickiest part of your new toilet installation, depending on the length and positioning of any pipework coming from your new toilet and also the pipes that are already fitted from your old toilet.
If you need any help to remove and install your toilet you can Contact us anytime!
We often take the energy we use in our homes for granted without realising there are plenty of ways to reduce our costs.
If you really want to keep those utility bills down this winter, there are some simple and inexpensive ways to improve your energy efficiency. Cutting the amount of power we use isn’t just good for our bank balances, however, it’s great for the environment as well.
Switch Off and Save
How often do we leave appliances plugged in when we go off to bed? Turning things off can save you a fair amount of money both in the short and long term. That means not leaving a light on in a room when it’s not being used, turning off radiators in bedrooms where no one is staying and not leaving devices on standby overnight.
Turn the Thermostat Down 1 Degree
Most people involved in energy efficiency have one consistent mantra and it’s this: Turning the thermostat down, even by just a degree or two, can save energy and therefore money.
Seal Draughty Areas
Draughts can cause a good deal of heat loss and give the perception of cold, especially in older homes. If you want to improve this, the easiest way is to walk around the house and check areas like windows and doors.
Change to LED Bulbs
We should all be starting to change to LED bulbs by now. Not only are they super-efficient but the cost of the bulbs has come down over the last few years.
Install a Smart Meter
Smart meters not only allow you to control your energy use it gives you a clearer idea where you can make changes and lower your bills. Tracking energy usage is really beneficial, particularly over the wintertime. Look at different times to put your heating on or perhaps turning off radiators in rooms that are not in use. The savings will soon mount up.
Boost Your Insulation
Finally, one area we can overlook is the insulation in the loft. This can often degrade over time or get flattened when someone heads up to get something or do some work.
Windows play an important role in both the aesthetic beauty of your home and a functional role when it comes to energy efficiency. Your windows are also an important element for defining the style, curb appeal, and ultimately the home’s value.
When to Replace Windows in Your House
Most professionals agree new windows should last between 15 and 25 years before you need to begin thinking about replacement.
Window construction and technology have improved immensely in the past couple of decades, and today most companies producing vinyl replacement windows offer a 20-25 year warranty.
If your windows are nearing this age or even older, it’s probably time to think about replacing them. If you’re not sure how old your windows are, there are some telltale signs to watch for letting you know it’s time to replace your old windows.
Five Signs It’s For Replacement Windows
There are some fairly obvious signs it might be time.
1. Warped, Damaged, or Broken
Often, minor damage like worn-out weatherstripping or a broken lock can be easily repaired. However, if you have double or triple pane windows and the glass is cracked or broken, or if the frame is warped or soft to the touch, replacement is probably a better option. Soft frames can indicate rot or water damage which if left unattended can cause serious and costly damage to your home.
2. Fog Up, Drafty, or Won’t Stay Open
Condensation build-up between multi-pane windows means the seals have failed, allowing moisture to infiltrate between the glass.
Once the seals fail, any inert gas used to make the window energy efficient is gone. If you feel a draft when the windows are closed, several reasons could be causing this including poor insulation or faulty seals.
Windows that won’t stay open or are difficult to open may be a result of balance issues caused by improper installation.
If your windows are leaking when it’s raining, much like drafty windows, they’re causing you to waste energy and increasing your utility bills.
Leaky windows can also lead to more serious problems like structural issues if the framing rots due to getting wet. In fact, leaky or drafty windows can cause your energy bills to significantly higher.
4.You Have Single Pane Windows
Single pane window technology is dated, inefficient, and offers no soundproofing qualities. If you can hear a lot of outside noise, feel drafts, or cold when sitting in front of the window it might be time to replace your single pane windows with new double or triple pane technology.
5. Visible Damage
Your home’s windows are one of its most prominent features and help to define its style and curb appeal. If they’re worn, fading, or visibly damaged, old windows detract from your home's look and can lower its value. Replacing your windows is a great way to give your home a facelift, make it more energy-efficient, and create a more comfortable and inviting interior.
If you’re in need of replacing your windows, Property Contractors 247 can help you in any window problem. We’re proud to be accredited by Master Builders in London.
When you work with us you’ll always receive high-level, hassle-free, professional workmanship, and we make sure you’re delighted, every step of the way. Contact us today!
Make sure your bathroom renovation goes to plan with your expert company Property Contractors 247.
We know how tempting it is to just rip it all out and start fresh, but by using our expert guide, you won't need to resort to such measures when you come to remodel a bathroom.
We've put together our best bathroom renovation tips to help with all types of bathroom remodels, straight from the experts of course, to ensure that your bathroom improvement project will be a success.
HOW MUCH DOES A BATHROOM RENOVATION COST?
So how much does a bathroom renovation cost? The scope of the project and the standard of fittings you choose has a huge influence, of course, but, on average, a complete bathroom remodel would cost around £4,500, assuming you use the existing pipework.
For lots more information and details on how much will a new bathroom cost, you can contact us! Property Contractors 247 and we can help you calculate the cost.
WHERE DO YOU START WHEN RENOVATING A BATHROOM?
• PLAN A BATHROOM LAYOUT AND STICK TO IT
• APPOINT AN ELECTRICIAN EARLY ON IN A BATHROOM REMODEL
You will need to find an electrician for any rewiring, lighting schemes and the addition of an electric shower or shower pump. Chat to one before any building or plumbing work starts so they can plan their jobs into your bathroom refurbishment schedule.
Make sure you choose a registered electrician as you will get additional protection should something go wrong.
• A SIMPLE BATHROOM RENOVATION IS EFFECTIVE
• REMEMBER YOU CAN HAGGLE ON YOUR BATHROOM RENOVATION COST
There’s absolutely nothing wrong with asking for a discount, one of our favourite bathroom remodel tips in fact, it’s built into some shops’ official policies. Even the big high street DIY stores will be open to negotiation on prices.
• THINK ABOUT WATERPROOFING THE SPACE
Tile backer boards can be used to line bathroom walls and shower enclosures. They are 100 percent waterproof when taped and jointed, and act as insulation too.
• A BIGGER SPACE WILL NEED MORE HEAT
If you are extending the bathroom space in your remodel, don't forget that this will mean a larger area to heat. Re-assess existing heating and upgrade the heat output if needed with a more powerful towel heater or radiator.
• REMEMBER TO INCLUDE PLENTY OF STORAGE
Nothing can ruin a nice new room faster than clutter, so don't forget about bathroom storage. Our feature is full of handy solutions. Use storage furniture and baskets to keep everything out of sight.
Always choose materials that can withstand the conditions of a bathroom. You can contact us anytime for bathroom renovation, we are here to help you!
Cleaning your carpets requires more than the occasional pass with a vacuum, and is essential to not only keeping your home beautiful, but to extending the life of your floors and improving the health of your family.
When using a steam cleaner on your carpets, be sure the machine has adequate suction.
Always test new stain removers in an inconspicuous area, such as the corner of a room or under a chair.
When blotting up a new spill, avoid spreading the stain by blotting from the outside of the stain inward.
When cleaning your carpets, remember a general principle of chemistry: like dissolves like.
Fresh oil stains can be removed by sprinkling cornstarch over the stain and allowing it time to absorb the oil.
Cleaning your carpets will not always remove foul odors. Fortunately, there’s an easy, inexpensive process that will! Sprinkle baking soda liberally over the carpet surface and allow it to sit as long as possible overnight if you can.
If you value the unique warmth and comfort of carpets, don’t let the task of maintaining your floors deter you! Contact us today!