Plumbers have their own secrets of the trade, so consider some things you should know about your plumbing that they might not tell you.

Protecting your pipes is the key to preventing costly water leaks. A water leak not only causes property damage, but it can also drive up your water bill. 

Wrap Them With Insulation

You can buy foam tubes that are easy to install and that will keep pipes warm during the winter.

Take Care of Your Sump Pump

Without the sump pump, the interior of the house can flood and that will lead to mold growth. 

Educate Your Family About the Toilet

The best way to avoid a clog is to make sure everyone knows what can and what can’t go down the toilet bowl. 

Caring for the Water Heater

If your water heater is over 8 to 12 years old, it’s time for a new one. If the one you have isn’t operating efficiently, it costs you money.

A little maintenance goes a long way with water heaters, too. Start by draining it at least once a year to remove sediment from the bottom.

When You Do Need to Hire a Plumber

There are some projects that simply require a licensed professional. When you need a plumber, look for someone that has been in business for at least five years. Check our sites Property Contractors 247

Protect your Home From Electrical Fires

It’s the time of year when the majority of electrical fires occur due to an increased number of heating appliances in homes and plug sockets being overloaded to accommodate Christmas lights.

Electrical fires happen because of problems in house wiring or appliance failures, but many occur due to mistakes that homeowners make like overloading electrical sockets or extension leads.

Here are the five most common causes of electrical fires in homes:

1.Faulty Sockets / Appliances

Most electrical fires are caused by faulty electrical plug sockets and dated appliances that have been around for a while.

Don’t use an appliance with a worn cord which could send heat onto combustible surfaces like floors, curtains, and rugs that can start a fire.

2.Light Fixtures & Fittings

Lamps, light bulbs, and light fixtures and fittings are another common reason for electrical fires. 

Installing a bulb with a wattage too high for the lamps and light fixtures is a leading cause of electrical fires. 

Check the maximum recommended bulb wattage on any lighting fixture or lamp and never exceed this amount.

3.Extension Leads

Appliances should be plugged directly into outlets and not plugged into an extension lead for any length of time.

Only use extension cords as a temporary measure. If you do not have the appropriate type of plug sockets for your appliances, get an electrician into your home to install new ones – a much safer alternative.

4.Portable Heaters

Many times people put these types of heaters too close to combustible surfaces such as curtains, beds, clothing, chairs, sofas and rugs. 

Coil space heaters are especially dangerous due to the coils becoming so hot that they will almost instantly ignite any nearby flammable surface.

If you do use portable heaters, use the radiator-type that diffuse heat over the entire surface of the appliance.

5.Outdated Wiring Systems

If a home is over 20 years old, it may not have the wiring capacity to handle the increased amounts of electrical appliances in today’s average UK home, such as computers,  televisions, games consoles, kitchen gadgets etc. 

Breakers should be triggered when circuits get overloaded by too much electricity, but outdated breaker boxes often have worn connectors that do not work, causing the system to overload and start an electrical fire.

If you can run through this list and be happy that everyone has been considered or actioned, then you’ve given your home the best chance against fire.

Accidents happen but usually an accident is penned down to wiring neglect or appliance failure that’s too near combustible material.
Your local fire and rescue service will be able to help and potentially conduct a home fire risk assessment. For more information, visit property contractors 247

Commercial and residential, both kinds of buildings can become prong to danger and threat. These perils can be in the form of damage electrical appliances, gas leakages, noisy location, uncheck of health-related factors and much more.

Below is a detailed checklist that is shared to follow for inspecting a building safety.

Physical Hazards and Safety:

Commercial and residential buildings can face physical hazards that can occur in the form of noisy and crowded areas and insufficient energy supply.

It can happen if unresistant weather material is used in the construction of the building.

Biological Hazards And Safety:

Presence of some organisms within and alongside a commercial and residential building can generate biological hazards.

These perils can occur because of an unhygienic environment, presence of a dump outside the building, and stagnation of water in streets. 

Chemical Hazards And Safety:

Commercial, as well as residential buildings, can face chemical threats because of the supply of gas pipelines and the presence of other lubricant and combustible materials. 

Ergonomic Hazards And Safety:

This kind of hazard is attached to the working conditions of employees in a commercial building.

The repetition of hard work, inadequate working postures, are some of the examples which can cause ergonomic hazards.

Uncheck Threats:

There occur various uncheck threats in commercial and residential buildings. 

In residential areas, the presence of broken wires, exposure of electrical cables to heatwaves, unresistant material in the construction of houses are few unchecked safety measures.

It is mandatory to overcome these loopholes to prevent damage or loss.

Psychological Hazards And Safety:

Commercial and residential building location and working environment can generate psychological problems among visitors, customers, and residents.

For example; if your office location is near the manufacturing industry, then the noise of machinery can increase the frustration level among employees and will also affect their productivity.

Contact Property Contractors 247 and we can help you!

We often take the energy we use in our homes for granted without realising there are plenty of ways to reduce our costs.

If you really want to keep those utility bills down this winter, there are some simple and inexpensive ways to improve your energy efficiency. Cutting the amount of power we use isn’t just good for our bank balances, however, it’s great for the environment as well. 

Switch Off and Save

How often do we leave appliances plugged in when we go off to bed? Turning things off can save you a fair amount of money both in the short and long term. That means not leaving a light on in a room when it’s not being used, turning off radiators in bedrooms where no one is staying and not leaving devices on standby overnight.

Turn the Thermostat Down 1 Degree

Most people involved in energy efficiency have one consistent mantra and it’s this: Turning the thermostat down, even by just a degree or two, can save energy and therefore money.

Seal Draughty Areas

Draughts can cause a good deal of heat loss and give the perception of cold, especially in older homes. If you want to improve this, the easiest way is to walk around the house and check areas like windows and doors.

Change to LED Bulbs

We should all be starting to change to LED bulbs by now. Not only are they super-efficient but the cost of the bulbs has come down over the last few years.

Install a Smart Meter

Smart meters not only allow you to control your energy use it gives you a clearer idea where you can make changes and lower your bills. Tracking energy usage is really beneficial, particularly over the wintertime. Look at different times to put your heating on or perhaps turning off radiators in rooms that are not in use. The savings will soon mount up.

Boost Your Insulation

Finally, one area we can overlook is the insulation in the loft. This can often degrade over time or get flattened when someone heads up to get something or do some work.

Make sure your bathroom renovation goes to plan with your expert company Property Contractors 247. 

Bathroom renovation is a big task and if you're working with a space that's awkwardly shaped, with quirky (even visible) pipework, not much natural light and so on, a complete bathroom remodel can be a challenge. 

We know how tempting it is to just rip it all out and start fresh, but by using our expert guide, you won't need to resort to such measures when you come to remodel a bathroom.

We've put together our best bathroom renovation tips to help with all types of bathroom remodels, straight from the experts of course, to ensure that your bathroom improvement project will be a success. 

HOW MUCH DOES A BATHROOM RENOVATION COST?

Before we reveal the tips and tricks to make your bathroom refurbishment run smoothly, let’s talk cost. After all, setting the right budget, and sticking to it is essential for all successful bathroom renovations.

So how much does a bathroom renovation cost? The scope of the project and the standard of fittings you choose has a huge influence, of course, but, on average, a complete bathroom remodel would cost around £4,500, assuming you use the existing pipework.

For lots more information and details on how much will a new bathroom cost, you can contact us! Property Contractors 247 and we can help you calculate the cost. 

WHERE DO YOU START WHEN RENOVATING A BATHROOM?

PLAN A BATHROOM LAYOUT AND STICK TO IT 

When it comes to bathroom renovations you'll want to avoid making unnecessary changes to your existing sanitaryware layout the fewer alterations you make, the lower your plumbing costs will be.

APPOINT AN ELECTRICIAN EARLY ON IN A BATHROOM REMODEL

You will need to find an electrician for any rewiring, lighting schemes and the addition of an electric shower or shower pump. Chat to one before any building or plumbing work starts so they can plan their jobs into your bathroom refurbishment schedule.

Make sure you choose a registered electrician as you will get additional protection should something go wrong. 

A SIMPLE BATHROOM RENOVATION IS EFFECTIVE

Keep the design simple in your bathroom remodel and avoid curves, steps, ornate decorative mouldings and non-essential details or ornamentation. The simpler the design, the more cost-effective it will be to fit out.

REMEMBER YOU CAN HAGGLE ON YOUR BATHROOM RENOVATION COST

There’s absolutely nothing wrong with asking for a discount, one of our favourite bathroom remodel tips in fact, it’s built into some shops’ official policies. Even the big high street DIY stores will be open to negotiation on prices.

THINK ABOUT WATERPROOFING THE SPACE

Tile backer boards can be used to line bathroom walls and shower enclosures. They are 100 percent waterproof when taped and jointed, and act as insulation too.

A BIGGER SPACE WILL NEED MORE HEAT

If you are extending the bathroom space in your remodel, don't forget that this will mean a larger area to heat. Re-assess existing heating and upgrade the heat output if needed with a more powerful towel heater or radiator.

REMEMBER TO INCLUDE PLENTY OF STORAGE

Nothing can ruin a nice new room faster than clutter, so don't forget about bathroom storage. Our feature is full of handy solutions. Use storage furniture and baskets to keep everything out of sight. 

Always choose materials that can withstand the conditions of a bathroom. You can contact us anytime for bathroom renovation, we are here to help you! 

Our Accreditation 

Follow Us on Social Media
Office address: Basement Office, 2, 4 Highgate Rd, Kentish Town, London NW5 1NR. | Company number: 10799887
© Copyright 2020 Property Contractors 247. All Rights Reserved. A Stunning Web Designs Creation
twitterfacebookgoogle-pluslinkedininstagram