COMMON CAUSES OF ELECTRICAL FIRES IN HOMES

PC 6

Protect your Home From Electrical Fires

It’s the time of year when the majority of electrical fires occur due to an increased number of heating appliances in homes and plug sockets being overloaded to accommodate Christmas lights.

Electrical fires happen because of problems in house wiring or appliance failures, but many occur due to mistakes that homeowners make like overloading electrical sockets or extension leads.

Here are the five most common causes of electrical fires in homes:

1.Faulty Sockets / Appliances

PC 6 1

Most electrical fires are caused by faulty electrical plug sockets and dated appliances that have been around for a while.

Don’t use an appliance with a worn cord which could send heat onto combustible surfaces like floors, curtains, and rugs that can start a fire.

2.Light Fixtures & Fittings

PC 6 2

Lamps, light bulbs, and light fixtures and fittings are another common reason for electrical fires. 

Installing a bulb with a wattage too high for the lamps and light fixtures is a leading cause of electrical fires. 

Check the maximum recommended bulb wattage on any lighting fixture or lamp and never exceed this amount.

3.Extension Leads

PC 6 3

Appliances should be plugged directly into outlets and not plugged into an extension lead for any length of time.

Only use extension cords as a temporary measure. If you do not have the appropriate type of plug sockets for your appliances, get an electrician into your home to install new ones – a much safer alternative.

4.Portable Heaters

PC 6 4

Many times people put these types of heaters too close to combustible surfaces such as curtains, beds, clothing, chairs, sofas and rugs. 

Coil space heaters are especially dangerous due to the coils becoming so hot that they will almost instantly ignite any nearby flammable surface.

If you do use portable heaters, use the radiator-type that diffuse heat over the entire surface of the appliance.

5.Outdated Wiring Systems

PC 6 5

If a home is over 20 years old, it may not have the wiring capacity to handle the increased amounts of electrical appliances in today’s average UK home, such as computers,  televisions, games consoles, kitchen gadgets etc. 

Breakers should be triggered when circuits get overloaded by too much electricity, but outdated breaker boxes often have worn connectors that do not work, causing the system to overload and start an electrical fire.

If you can run through this list and be happy that everyone has been considered or actioned, then you’ve given your home the best chance against fire.

Accidents happen but usually an accident is penned down to wiring neglect or appliance failure that’s too near combustible material.
Your local fire and rescue service will be able to help and potentially conduct a home fire risk assessment. For more information, visit property contractors 247

Our Accreditation
Follow Us on Social Media
Office address: 1B Fortess Road, Kentish Town, London, NW5 1AA. | Company number: 10799887

© Copyright 2021 Property Contractors 247. All Rights Reserved. A Stunning Web Designs Creation